Mazda B-Series 1998-06

Instrument Cluster

Print

Removal & Installation



1995-98 B Series Pick-Up Models
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the radio.
  4.  



Click image to see an enlarged view

Fig. Exploded view of the 1995-98 instrument cluster trim panels

  1. Remove the center finish panel to access and remove the lower trim and knee bolster attaching screws.
  2.  
  3. Remove the lower trim and knee bolster.
  4.  
  5. Remove the cluster finish panel and unplug the headlamp and dimmer switch harnesses from it.
  6.  



Click image to see an enlarged view

Fig. Exploded view of the instrument cluster mounting

  1. Remove the four instrument cluster retaining screws.
  2.  
  3. If equipped with an automatic transmission, remove the two PRNDL indicator attaching screws and remove the indicator by sliding it straight down.
  4.  
  5. Disconnect the electrical wire harness plugs and remove the cluster.
  6.  



Click image to see an enlarged view

Fig. View of the electrical connections on the back of the cluster

To install:

  1. Connect the electrical wire harness plugs and install the instrument cluster.
  2.  
  3. If equipped with an automatic transmission, install the two PRNDL indicator attaching screws and remove the indicator by sliding it straight down.
  4.  
  5. Install the four instrument cluster retaining screws.
  6.  
  7. Connect the headlamp and dimmer switch harnesses to the cluster finish panel then install it.
  8.  
  9. Install the lower trim and knee bolster panels and the attaching screws.
  10.  
  11. Install the center finish panel.
  12.  
  13. Install the radio.
  14.  
  15. Connect the negative battery cable. Start the vehicle and check all gauges, lamps and signals for proper operation.
  16.  

 
label.common.footer.alt.autozoneLogo