Mazda Car 2002-04

Antenna

Print

Power Antenna



Antenna Diagnosis & Testing
Miata
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the left side trunk side trim.
  4.  
  5. Unplug the connector.
  6.  
  7. Ground terminal H of the connector and apply battery voltage to terminal B. the antennal should go down. Apply battery voltage to terminals B and D at the same time with H still grounded the antenna should go up. If not replace the motor.

    Click image to see an enlarged view

    Fig. Antenna motor terminals-Miata

  8.  

Antenna Motor
Removal & Installation
Miata
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the left side trunk side trim.
  4.  
  5. Remove the rear antenna feeder
  6.  
  7. Remove the drain hose
  8.  
  9. Remove the mounting nut using snap ring pliers.
  10.  
  11. Remove the spacer, nut and antenna assembly.
  12.  
  13. Remove the drain hose, screw, bracket, rod insulator o-ring and motor.

    Click image to see an enlarged view

    Fig. Exploded view of the antenna assembly-Miata

  14.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo