Mazda Car 2002-04

Removal & Installation

Print

Tie Rod



  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Tie rod nut
     
    Tie rod end from the steering knuckle
     
    Engine mount member
     
    Tie rod end
     

  4.  

To install:

  1. Install or connect the following:

    Tie rod end
     
    Engine mount member and torque the bolts to 68 ft. lbs. (93 Nm)
     
    Tie rod end to the steering knuckle
     
    Tie rod nut and torque the new castle nut to 32 ft. lbs. (44 Nm)
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo