Mazda Car 2005-06

2.0L L4 - Auto 2

Print

Trouble Code: P0301



Cylinder 1 Misfire Detected

Possible Causes:



Base engine mechanical fault affecting only Cylinder 1
 
CKP sensor is damaged or failed (problem may be intermittent)
 
Fuel metering fault that affects only Cylinder 1
 
Ignition system fault that affects only Cylinder 1
 

Trouble Code: P0302



Cylinder 2 Misfire Detected

Possible Causes:



Base engine mechanical fault affecting only Cylinder 2
 
CKP sensor is damaged or failed (problem may be intermittent)
 
Fuel metering fault that affects only Cylinder 2
 
Ignition system fault that affects only Cylinder 2
 

Trouble Code: P0303



Cylinder 3 Misfire Detected

Possible Causes:



Base engine mechanical fault affecting only Cylinder 3
 
CKP sensor is damaged or failed (problem may be intermittent)
 
Fuel metering fault that affects only Cylinder 3
 
Ignition system fault that affects only Cylinder 3
 

Trouble Code: P0304



Cylinder 4 Misfire Detected

Possible Causes:



Base engine mechanical fault affecting only Cylinder 4
 
CKP sensor is damaged or failed (problem may be intermittent)
 
Fuel metering fault that affects only Cylinder 4
 
Ignition system fault that affects only Cylinder 4
 

Trouble Code: P0305



Cylinder 5 Misfire Detected

Possible Causes:



Base engine mechanical fault affecting only Cylinder 5
 
CKP sensor is damaged or failed (problem may be intermittent)
 
Fuel metering fault that affects only Cylinder 5
 
Ignition system fault that affects only Cylinder 5
 

Trouble Code: P0327



Knock Sensor Circuit Low Input

Possible Causes:



Knock sensor signal circuit is shorted to ground
 
Knock sensor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0328



Knock Sensor Circuit High Input

Possible Causes:



Knock sensor signal circuit is open
 
Knock sensor signal circuit is shorted to VREF or system power
 
Knock sensor is damaged or has failed
 
PCM is damaged
 

Trouble Code: P0335



Crankshaft Position (NE) Sensor Circuit Malfunction

Possible Causes:



CKP sensor signal is open or shorted to ground
 
CKP sensor signal is shorted to VREF or system power (B+)
 
CKP sensor is damaged or has failed
 
Trigger wheel or tone wheel is damaged
 
PCM has failed
 

Trouble Code: P0340



Camshaft Position Sensor Circuit Malfunction

Possible Causes:



CMP sensor signal is open or shorted to ground
 
CMP sensor signal is shorted to VREF or system power (B+)
 
CMP sensor is damaged, or the sensor signal shielding is open
 
PCM has failed
 

Trouble Code: P0401



EGR System Insufficient Flow Detected

Possible Causes:



EGR boost solenoid control circuit is open or shorted to ground
 
EGR boost solenoid power circuit is open to the Main Relay
 
EGR boost solenoid is damaged or has failed
 
EGR boost sensor is damaged or has failed
 
EGR valve position sensor is damaged, stuck or has failed
 
EGR valve assembly is leaking, damaged or has failed
 
EGR valve vacuum hose(s) lose, damaged or disconnected
 
IAT, MAF, TP and VSS (sensor) has drifted out-of-range
 
PCM has failed
 

Trouble Code: P0403



EGR Valve (stepper motor) malfunction

Possible Causes:



EGR valve malfunction
 
Connector or terminal malfunction
 
Short to power circuit in wiring to EGR valve terminals and PCM terminals
 
Open circuit in wiring between EGR valve terminals and PCM terminals
 
PCM has failed
 

Trouble Code: P0421



Warm-up Catalyst Efficiency Below Normal (Bank 1)

Possible Causes:



Air leaks at the exhaust manifold or in the exhaust pipes
 
Catalytic converter is contaminated, damaged or has failed
 
Front HO2S and/or the rear HO2S is loose in the mounting hole
 
Front HO2S older (aged) than the rear HO2S (HO2S is lazy)
 
Front HO2S or rear HO2S is contaminated with fuel or moisture
 

Trouble Code: P0441



EVAP System Malfunction

Possible Causes:



EVAP purge solenoid is damaged or has failed
 
EVAP charcoal canister is loaded with fuel or moisture
 
Vapor line is damaged or restricted between the purge solenoid and intake manifold, or between check valve and vapor valve
 
PCM has failed
 

Trouble Code: P0442



EVAP System Small Leak (0.040-) Detected

Possible Causes:



Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Purge solenoid valve is damaged or has failed
 
Charcoal canister is loaded with fuel or moisture
 
Canister drain cut valve (CDCV) is damaged or has failed
 
Rollover valve, catch tank valve or fuel tank damaged/ leaking
 
Fuel tank pressure sensor is damaged or has failed
 
ECT, IAT, MAF, VSS or TP sensor signals out-of-calibration
 
Vapor line(s) damaged or leaking between the purge solenoid and the intake manifold, EVAP purge solenoid valve and the canister, canister drain cut valve and the rollover valve
 
PCM has failed
 

Trouble Code: P0443



EVAP Purge Solenoid Circuit Malfunction

Possible Causes:



VMV solenoid control circuit is open or shorted to ground
 
VMV solenoid control circuit is shorted to system power (B+)
 
VMV solenoid power circuit is open or shorted to ground
 
VMV solenoid is damaged or has failed
 
PCM has failed (the VMV solenoid driver may be damaged)
 

Trouble Code: P0446



EVAP System Vent Control Malfunction

Possible Causes:



Canister drain cut valve (CDCV) is damaged, sticking or failed
 
Tank pressure control valve (TPCV) is damaged or has failed
 
Charcoal canister is loaded with fuel or moisture
 
Air filter is severely restricted, or 2-way check valve is clogged
 
FTP sensor signal circuit is open, shorted to ground or to power
 
FTP sensor power circuit is open or shorted to ground
 
FTP sensor is damaged or has failed
 
BARO, ECT, IAT, MAF, VSS or TP sensor is out-of-calibration
 
Fuel tank level sensor is damaged or out-of-calibration
 
Fuel vapor line(s) kinked or blocked between the CDVC valve and intake manifold, or between the TPCV and the canister
 

Trouble Code: P0455



EVAP System Large Leak (0.080-) Detected

Possible Causes:



Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Purge solenoid valve is damaged or has failed
 
Charcoal canister is loaded with fuel or moisture, or has failed
 
Canister drain cut valve (CDCV) is damaged or leaking
 
Fuel tank pressure (FTP) sensor is damaged or has failed
 
Catch tank or rollover valve is damaged, or fuel tank is leaking
 
Vapor line(s) damaged or leaking between the purge solenoid and intake manifold, purge solenoid and canister, or between the pressure control valve, check valve and rollover valve
 
PCM has failed
 

Trouble Code: P0456



EVAP System Small Leak (0.020-) Detected

Possible Causes:



Fuel filler cap loose, cross-threaded, incorrect part or damaged
 
Small holes or cuts in any of the vapor hoses and/or tubes
 
CV solenoid stuck part-way open while it is commanded closed
 
EVAP system component seals leaking at the purge valve, FTP sensor, CV solenoid, fuel vapor control valve or vapor vent tube
 
Fuel vapor hose or tube connections loose at the component
 
PCM has failed
 

Trouble Code: P0461



Fuel Tank Level Sensor Circuit Range/Performance

Possible Causes:



Fuel gauge sending unit is damaged or has failed
 
Fuel gauge sending unit signal is open or shorted to ground
 
Fuel gauge sending unit power circuit is open
 
Instrument cluster is damaged or has failed
 
PCM has failed
 

Trouble Code: P0462



Fuel Level Sensor Circuit Low Input

Possible Causes:



Fuel gauge sending unit signal is shorted to sensor ground
 
Fuel gauge sending unit signal is shorted to chassis ground
 
Fuel gauge sending unit is damaged or has failed
 
PCM has failed
 

Trouble Code: P0463



Fuel Level Sensor Circuit High Input

Possible Causes:



Fuel gauge sending unit signal shorted to VREF or power
 
Fuel gauge sending unit ground circuit is open
 
Fuel gauge sender signal is damaged or has failed
 
PCM has failed
 

Trouble Code: P0480



Condenser Fan Relay Control Circuit Malfunction

Possible Causes:



Condenser fan relay control circuit open or shorted to ground
 
Condenser fan relay control power circuit is open
 
Condenser fan relay is damaged or has failed
 
PCM has failed
 

Trouble Code: P0500



Vehicle Speed Sensor Circuit Malfunction

Possible Causes:



VSS signal circuit is open, shorted to ground or to power
 
VSS power circuit is open or shorted to ground
 
VSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0505



Idle Speed Control System Malfunction

Possible Causes:



Throttle body is damaged, dirty or idle speed out of adjustment
 
High resistance between PCM and IAC valve control circuits
 
IAC valve circuits open, shorted to ground or shorted to power
 
IAC valve air inlet is plugged, dirty or restricted
 
IAC valve is damaged or has failed
 

Trouble Code: P0507



Idle Control System RPM Higher Than Expected

Possible Causes:



Air intake system leaks (in the intake manifold or PCV valve)
 
IAC valve power circuit is open between main relay and valve
 
High resistance between PCM and IAC valve control circuits
 
IAC valve circuits open, shorted to ground or shorted to power
 
IAC valve air inlet is plugged, dirty or restricted
 
IAC valve is damaged or has failed
 
Throttle body is damaged or dirty (it may need to be cleaned)
 

Trouble Code: P0564



Cruise Control Switch Circuit Malfunction

Possible Causes:



Cruise control switch malfunction
 
Connector or terminal malfunction
 
Short to power circuit in wiring from cruise control terminal B and PCM terminal 3P.
 
Short to ground circuit in wiring from cruise control terminal B and PCM terminal 3P
 
PCM has failed
 

Trouble Code: P0571



Cruise Control Switch Circuit Malfunction

Possible Causes:



Cruise control switch malfunction
 
Connector or terminal malfunction
 
Short to power circuit in wiring from cruise control terminal B and PCM terminal 3P.
 
Short to ground circuit in wiring from cruise control terminal B and PCM terminal 3P
 
PCM has failed
 

Trouble Code: P0706



Transmission Range Switch Circuit Malfunction

Possible Causes:



TR signal -P- circuit open between the switch and the PCM (0v)
 
TR signal -D- circuit open between the switch and the PCM (0v)
 
TR signal -S- circuit open between the switch and the PCM (0v)
 
TR signal -L- circuit open between the switch and the PCM (0v)
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0707



Transmission Range Switch Range/Performance

Possible Causes:



TR switch signal circuit is shorted to another switch signal
 
TR switch signal circuit is open (problem may be intermittent)
 
TR switch is damaged, out of adjustment or it has failed
 
PCM has failed
 

Trouble Code: P0708



Transmission Range Switch Circuit Malfunction

Possible Causes:



TR switch signal circuit is open between the switch and PCM
 
TR switch signal circuit is shorted between switch and PCM
 
TR switch signal circuit is shorted to VREF or system power
 
TR switch ground circuit is open between switch and ground
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0711



Transmission Fluid Temperature Sensor Circuit Range/Performance

Possible Causes:



TFT sensor signal circuit is open between sensor and the PCM
 
TFT sensor signal circuit is shorted to ground
 
TFT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0712



Transmission Fluid Temperature Sensor Low Input (High Temperature)

Possible Causes:



TFT sensor signal circuit has a short toe ground condition
 
TFT sensor is damaged or has failed (it may be shorted)
 
PCM has failed
 

Trouble Code: P0713



Transmission Fluid Temperature Sensor High Input (Low Temperature)

Possible Causes:



TFT sensor signal circuit is open between sensor and the PCM
 
TFT sensor signal circuit has a short to power condition
 
TFT sensor is damaged or has failed (it may be open)
 
PCM has failed
 

Trouble Code: P0715



Turbine Shaft Sensor Circuit Malfunction

Possible Causes:



TSS (+) signal circuit is open (an intermittent fault)
 
TSS (+) signal circuit shorted to ground (intermittent fault)
 
TSS (-) signal circuit is open (an intermittent fault)
 
TSS (-) signal circuit shorted to ground (intermittent fault)
 
TSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0720



Output Shaft Sensor Circuit Malfunction

Possible Causes:



OSS (+) signal circuit is open or shorted to ground
 
OSS (-) signal circuit is open or shorted to ground
 
OSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0731



Transmission 1st Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 1-2 clutch is slipping (mechanical fault)
 
A/T 1-2 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator or the pressure modifier valve is stuck
 
A/T solenoid reducing valve is stuck (mechanical fault)
 
PCM has failed
 

Trouble Code: P0732



Transmission 2nd Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 2-3 clutch is slipping (mechanical fault)
 
A/T 1-2 or the 2-3 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator or the pressure modifier valve is stuck
 
A/T solenoid reducing valve is stuck (mechanical fault)
 
PCM has failed
 

Trouble Code: P0733



Transmission 3rd Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 3-4 clutch is slipping (mechanical fault)
 
A/T 2-3 or the 3-4 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator or the pressure modifier valve is stuck
 
A/T solenoid reducing valve is stuck (mechanical fault)
 
PCM has failed
 

Trouble Code: P0734



Transmission 4th Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 2-4 brake bank or 3-4 clutch is slipping (mechanical fault)
 
A/T 1-2, 2-3 or 3-4 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator, pressure modifier or solenoid reducing valve is stuck
 
PCM has failed
 

Trouble Code: P0741



Torque Converter Clutch Control Engagement Error

Possible Causes:



Brake switch is damaged, out of adjustment or has failed
 
Engine performance conditions are erratic or unstable
 
Engine or transmission temperature is too high
 
TCC control valve is stuck in the -off- position
 
An internal transaxle component is damaged or has failed
 
PCM has failed
 

 
label.common.footer.alt.autozoneLogo