Mazda Car 2005-06

Oil Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the precautions section.
    CAUTION
    Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.

  2.  
  3. Remove the oil pan.
  4.  
  5. Remove the oil strainer.
  6.  
  7. Remove the oil pump chain guide.
  8.  
  9. Remove the oil pump chain tensioner.
  10.  
  11. Remove the oil pump chain.
  12.  
  13. Install the tool 49 G032 354 onto the oil pump sprocket to stop the oil pump from rotating.
  14.  
  15. Remove the oil pump sprocket.
  16.  
  17. Remove the oil pump bolts and pump.

    Click image to see an enlarged view

    Fig. Exploded view of the oil pump and related components-MX-5 Miata

  18.  

To install:

  1. Install the oil pump, tighten the bolts in the sequence illustrated to 8-12 Nm (71-105 inch lbs.), then final tighten to 17-23 Nm (12.6-17 ft. lbs.).
  2.  
  3. Install the pump sprocket. Tighten the bolt to 20-30 Nm (14.8-22 ft. lbs.).
  4.  
  5. Install the pump chain and tensioner and chain guide. Tighten the tensioner and guide bolts to 8-11.5 Nm (71-101 inch lbs.).
  6.  
  7. Install the oil strainer. Tighten the bolts to 8-11.5 Nm (71-101 inch lbs.).
  8.  
  9. Install the oil pan.

    Click image to see an enlarged view

    Fig. Install the tool 49 G032 354 onto the oil pump sprocket to stop the oil pump from rotating-MX-5 Miata



    Click image to see an enlarged view

    Fig. Oil pump bolt torque sequence-MX-5 Miata

  10.  

Mazdaspeed6
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the oil pan.
  4.  
  5. Remove the oil strainer.
  6.  
  7. Remove the oil pump chain guide, tensioner, spring and chain.
  8.  
  9. Remove the oil pump sprocket using tool 49 G032 354 to stop the pump rotating.
  10.  
  11. Remove the oil pump bolts and the pump.

    Click image to see an enlarged view

    Fig. Remove and install the oil pump sprocket using tool 49 G032 354 to stop the pump rotating-Mazdaspeed6

  12.  

To install:

  1. Install the oil pump and tighten the bolts in two steps in the sequence illustrated. Tighten the bolts in sequence to 71-105 inch lbs. (8-12 Nm) and final tighten to 12.6-17 ft. lbs. (17-23 Nm).
  2.  
  3. Install the oil pump sprocket using tool 49 G032 354 to stop the pump rotating. Tighten the bolts to the specifications shown in the oil pump exploded view illustration.
  4.  
  5. Install the oil pump chain, spring, tensioner and guide. Tighten the bolts to the specifications shown in the oil pump exploded view illustration.
  6.  
  7. Install the oil strainer. Tighten the bolts to the specifications shown in the oil pump exploded view illustration.
  8.  
  9. Install the oil pan.
  10.  
  11. Fill the engine with clean oil.
  12.  
  13. Start the vehicle, check for leaks and repair if necessary.

    Click image to see an enlarged view

    Fig. Oil pump torque sequence-Mazdaspeed6

  14.  

 
label.common.footer.alt.autozoneLogo