Mazda Car 2005-06

Cables

Print

Adjustment



  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Depress the brake pedal several times.
  4.  
  5. Remove the parking brake lever boot
  6.  
  7. Turn the adjusting nut and adjust the parking brake lever.
  8.  
  9. After adjustment, pull the parking brake lever one notch and verify that the parking brake warning light illuminates.
  10.  
  11. Verify that the rear brakes do not drag.
  12.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Start the engine and depress the brake pedal several times.
  4.  
  5. Stop the engine.
  6.  
  7. Pull the underside of the cover out and remove the clips from the console.
  8.  
  9. Disengage the hooks from the console and remove the cover.
  10.  
  11. Verify the position of the adjusting nut while looking in from above the console, and set the socket on the nut.
  12.  
  13. Turn the adjusting nut to adjust the parking brake lever.
  14.  
  15. After adjustment, inspect the following points:
  16.  
  17. Turn the ignition switch to ON, pull the parking brake lever one notch, and verify that the parking brake warning light illuminates.
  18.  
  19. Verify that the rear brakes do not drag.
  20.  

 
label.common.footer.alt.autozoneLogo