Mazda Car 2005-06

Relieving Fuel System Pressure

Print

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the fuel-filler cap to release the pressure inside the fuel tank.
  4.  
  5. Remove the fuel pump relay
  6.  
  7. Start the engine.
  8.  
  9. After the engine stalls, crank the engine several times .
  10.  
  11. Turn the ignition switch to the LOCK position.
  12.  
  13. Install the fuel pump relay.
  14.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the filler cap.
  4.  
  5. Remove the fuel pump relay from the relay box, located in the engine compartment.
  6.  
  7. Start the engine.
  8.  
  9. After the engine stalls, turn the ignition switch OFF .
  10.  
  11. After servicing the vehicle, reinstall the relay.
  12.  

 
label.common.footer.alt.autozoneLogo