Mazda Car 2005-06

Windshield Wiper System

Print

Wiper Motor



Removal & Installation
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the windshield wiper arm cap, nut and the arm and blade assembly.
  6.  
  7. Remove the cowl grille as follows:
    1. Remove the covers.
    2.  
    3. Remove the screws.
    4.  
    5. Remove windshield washer hose from cowl grille.
    6.  
    7. Remove the weatherstrip.
    8.  
    9. Pull the cowl grille up so that it is free from the pins, pull the tabs out, and then remove the front window glass.
    10.  

  8.  
  9. Remove the cowl grille.

    Click image to see an enlarged view

    Fig. Exploded view of the cowl grille-MX-5 Miata

  10.  
  11. Disconnect the windshield wiper motor connector.
  12.  
  13. Remove the wiper motor bolts and nut and remove the wiper motor.

    Click image to see an enlarged view

    Fig. Front wiper motor assembly-MX-5 Miata

  14.  

To install:

  1. Installation is the reverse of removal.
  2.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the windshield wiper arm cap, nut and the arm and blade assembly.
  6.  
  7. Remove the front fender molding caps, screws and weatherstripping, the remove the cowl grille.
  8.  
  9. Disconnect the windshield wiper motor connector and remove the motor bolts and motor.
  10.  

To install:

  1. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Front wiper motor assembly-Mazda6 and Mazdaspeed6

  2.  

 
label.common.footer.alt.autozoneLogo