Mazda MPV 1999-06

Alternator

Print

Installation



2.5L Engines
  1. Install or connect the following:

    Alternator. Tighten the bolts to 29-41 ft. lbs. (40-50 Nm).
     
    Center shaft support bracket. Tighten the bolts to 32-45 ft. lbs. (43-61 Nm).
     
    Alternator harness connectors. Tighten the battery terminal nut to 87-130 inch lbs. (10-15 Nm).
     
    Right axle halfshaft and center shaft assembly
     
    Exhaust front pipe
     
    Subframe transverse section. Tighten the bolts to 69-96 ft. lbs. (94-131 Nm).
     
    Accessory drive belt
     
    Negative battery cable
     

  2.  

3.0L Engine
  1. Install or connect the following:

    Alternator
     
    Alternator harness connectors. Tighten the battery terminal nut to 44-60 inch lbs. (5-7 Nm).
     
    Power steering pulley. Tighten the nut to 29-43 ft. lbs. (40-58 Nm).
     
    Accessory drive belts. Tighten the alternator lockbolt to 14-18 ft. lbs. (19-25 Nm) and the pivot bolt to 28-38 ft. lbs. (38-51 Nm).
     
    Negative battery cable
     

  2.  

Removal



2.5L Engine
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     
    Subframe transverse section
     
    Exhaust front pipe
     
    Right axle halfshaft and center shaft assembly
     
    Alternator harness connectors
     
    Center shaft support bracket
     
    Alternator
     

  4.  

3.0L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belts
     
    Power steering pulley
     
    Alternator harness connectors
     
    Alternator
     

  4.  

Removal & Installation



3.0L Engine
  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belt
     
    Exhaust front pipe
     
    Right axle halfshaft and center shaft assembly
     
    Alternator harness connectors
     
    Center shaft support bracket
     
    Alternator
     

  4.  

To install:

  1. Install or connect the following:

    Alternator. Tighten the bolts to 29-41 ft. lbs. (40-50 Nm).
     
    Center shaft support bracket. Tighten the bolts to 32-45 ft. lbs. (43-61 Nm).
     
    Alternator harness connectors. Tighten the battery terminal nut to 87-130 inch lbs. (10-15 Nm).
     
    Right axle halfshaft and center shaft assembly
     
    Exhaust front pipe
     
    Accessory drive belt
     
    Negative battery cable
     

  2.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Accessory drive belts
     
    Power steering pulley
     
    Alternator harness connectors
     
    Alternator
     

  4.  

To install:

  1. Install or connect the following:

    Alternator
     
    Alternator harness connectors. Tighten the battery terminal nut to 44-60 inch lbs. (5-7 Nm).
     
    Power steering pulley. Tighten the nut to 29-43 ft. lbs. (40-58 Nm).
     
    Accessory drive belts. Tighten the alternator lockbolt to 14-18 ft. lbs. (19-25 Nm) and the pivot bolt to 28-38 ft. lbs. (38-51 Nm).
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo