Mazda MPV 1999-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Position hood latch out of the way.
  6.  
  7. If equipped, remove the upper radiator tie strap.
  8.  
  9. Raise and support the vehicle.
  10.  
  11. Remove the lower center support bolt and the lower fan bolts.
  12.  
  13. Lower the vehicle.
  14.  
  15. Remove the upper center support bolt and the upper center support.
  16.  
  17. Disconnect the LH fan electrical connector.
  18.  
  19. If equipped, disconnect the cooling fan resistor and the cooling fan relay electrical connectors.
  20.  
  21. Remove the LH and RH upper radiator supports.
  22.  
  23. Tilt the radiator forward for clearance.
  24.  
  25. Remove the five bolts and the LH cooling fan.
  26.  
  27. If necessary remove the bolt and disconnect the electrical connector, remove the RH fan.
  28.  
  29. To install, reverse the removal procedure. Tighten all fasteners to 89 inch lbs. (10 Nm).
  30.  

 
label.common.footer.alt.autozoneLogo