Mazda MPV 1999-06

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Wheel assembly
     
    Lower lock pin bolt from the caliper
     

  4.  
  5. Rotate the caliper upward and remove the brake pads, shims, guide plates and if equipped, the springs.
  6.  

To install:

  1. Remove the master cylinder reservoir cap and remove about12
  2.  
  3. Using a large C-clamp and piece of wood, depress the caliper piston(s) until they bottom in their bores.
  4.  
  5. Install the shims, guide plates, new pads and if removed, the springs.
  6.  
  7. Reposition the caliper and install the lock pin bolt. Torque the lockbolt to 61-69 ft. lbs. 84-93 Nm).
  8.  
  9. Install the wheels, lower the vehicle, refill the master cylinder and depress the brake pedal a few times to restore pressure. Bleed the system if required.
  10.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheel assembly
     
    Lower lock pin bolt from the caliper
     

  4.  
  5. Rotate the caliper upward and remove the brake pads, shims, guide plates and if equipped, the springs.
  6.  

To install:

  1. Remove the master cylinder reservoir cap and remove about 1 / 2 of the fluid from the reservoir.
  2.  
  3. Using a large C-clamp and piece of wood, depress the caliper piston(s) until they bottom in their bores.
  4.  
  5. Install the shims, guide plates, new pads and if removed, the springs.
  6.  
  7. Reposition the caliper and install the caliper mounting bolt. Torque the mounting bolt to 61-69 ft. lbs. (83-93 Nm).
  8.  
  9. Install the wheels, lower the vehicle, refill the master cylinder and depress the brake pedal a few times to restore pressure. Bleed the system if required.
  10.  

 
label.common.footer.alt.autozoneLogo