Mazda MPV 1999-06

Coil Springs

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the strut assembly from the vehicle.
  4.  
  5. Compress the coil spring and remove the piston rod nut.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Strut mount bearing
     
    Spring upper seat
     
    Coil spring
     

  8.  

To install:

  1. Install or connect the following:

    Coil spring
     
    Spring upper seat
     
    Strut mount bearing
     
    Upper strut mount. Tighten the piston rod nut to 66-94 ft. lbs. (90-127 Nm).
     

  2.  
  3. Remove the spring compressor and install the strut assembly to the vehicle.
  4.  
  5. Check the wheel alignment and adjust as necessary.
  6.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Remove the strut assembly from the vehicle.
  4.  
  5. Compress the coil spring and remove the piston rod nut.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Strut mount bearing
     
    Spring upper seat
     
    Coil spring
     

  8.  

To install:

  1. Install or connect the following:

    Coil spring
     
    Spring upper seat
     
    Strut mount bearing
     
    Upper strut mount. Tighten the piston rod nut to 66-94 ft. lbs. (90-127 Nm).
     

  2.  
  3. Remove the spring compressor and install the strut assembly to the vehicle.
  4.  
  5. Check the wheel alignment and adjust as necessary.
  6.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the strut assembly from the vehicle.
  4.  
  5. Compress the coil spring and remove the piston rod nut.
  6.  
  7. Remove or disconnect the following:

    Upper strut mount
     
    Strut mount bearing
     
    Spring upper seat
     
    Coil spring
     

  8.  

To install:

  1. Install or connect the following:

    Coil spring
     
    Spring upper seat
     
    Strut mount bearing
     
    Upper strut mount. Tighten the piston rod nut to 66-94 ft. lbs. (90-127 Nm).
     

  2.  
  3. Remove the spring compressor and install the strut assembly to the vehicle.
  4.  
  5. Check the wheel alignment and adjust as necessary.
  6.  

 
label.common.footer.alt.autozoneLogo