Mazda MPV 1999-06

Stabilizer Bar (Sway Bar) & Links

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:
    NOTE
    Apply rubber grease to the inside surface of the stabilizer bushing. Align the bushing with the inside of the positioning plate on the stabilizer bar.



    Stabilizer control link
     
    Stabilizer bracket
     
    Stabilizer bushing
     
    Stabilizer bar
     

  4.  
  5. To install, reverse removal procedure.
  6.  
  7. Inspect the front wheel alignment and adjust it if necessary.
  8.  
  9. Tighten the following to specification:

    Stabilizer bracket bolts: 45 ft. lbs. (62 Nm).
     
    Stabilizer control link nuts: 45 ft. lbs. (62 Nm).
     

  10.  

 
label.common.footer.alt.autozoneLogo