Mazda MPV 1999-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Drain and recycle the engine coolant.
  6.  
  7. Raise and support the vehicle.
  8.  
  9. Remove the lower splash shields.
  10.  
  11. Disconnect the lower radiator hose and the degas return hose.
  12.  
  13. Remove the lower center support bolt.
  14.  
  15. Lower the vehicle.
  16.  
  17. Disconnect the remaining coolant hose connections.
  18.  
  19. Position the hood latch assembly out of the way.
  20.  
  21. Remove the two bolts and the center support.
  22.  
  23. Remove the two top bolts retaining the cooling fan to the radiator.
  24.  
  25. Remove the upper radiator support brackets, and remove the radiator from the vehicle.
  26.  
  27. To install, reverse removal procedure. Tighten all fasteners to 89 inch lbs. (10 Nm).
  28.  
  29. Start the engine and check for leaks, repair if necessary.
  30.  

 
label.common.footer.alt.autozoneLogo