Mazda RX-8 2004-06

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Remove the clip.
  2.  
  3. Remove the clutch pipe and hose.
  4.  
  5. Remove the clutch pipe
  6.  
  7. Unfasten the bolt, then remove the clutch slave cylinder.

    Click image to see an enlarged view

    Fig. Remove the clip (1), clutch pipe and hose (2), clutch pipe (3), bolt (4) and clutch slave cylinder (5)

  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Bleed the air from the system, as outlined later in this section.
  4.  
  5. Inspect and adjust the clutch pedal, as outlined under Clutch.
  6.  

 
label.common.footer.alt.autozoneLogo