Mazda RX-8 2004-06

Initialization

Print

  1. Connect the negative battery cable.
  2.  
  3. Turn the ignition switch to the ON position.
  4.  
  5. Confirm that the Dynamic Stability Control (DSC) indicator light comes on and the DSC OFF light flashes.
  6.  
  7. Turn the steering wheel to the right full lock position and then all the way to the left full lock position.
  8.  
  9. Confirm that the DSC OFF light goes out.
  10.  
  11. Turn the ignition off.
  12.  
  13. Turn the ignition on again and confirm that the DSC indicator light is out. If the light is not out, repeat the procedure.
  14.  
  15. Drive the vehicle for about 10 minutes and confirm that the ABS and DSC indicator lights are out.
  16.  

 
label.common.footer.alt.autozoneLogo