Mazda Tribute 2001-06

Slave (Actuator) Cylinder

Print

Removal & Installation




WARNING
Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.


CAUTION
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash it immediately with water.



Click image to see an enlarged view

Fig. Disconnecting the clutch slave cylinder tube



Click image to see an enlarged view

Fig. Removing clutch slave cylinder bolts (1) and slave cylinder (2)

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the transaxle
  6.  
  7. Disconnect the clutch slave cylinder tube and plug it to prevent excess fluid loss.
  8.  
  9. Remove the clutch slave cylinder bolts.
  10.  
  11. Remove the clutch slave cylinder.
  12.  


WARNING
Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.


CAUTION
Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, wash it immediately with water. Remove the clutch slave cylinder to clutch line adapter.

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the transaxle
  6.  
  7. Remove the clutch slave cylinder bolts.
  8.  
  9. Remove the clutch slave cylinder.
  10.  
  11. To install, reverse the removal procedure. Torque slave cylinder bolts to 9 ft. lbs. (Nm).
  12.  
  13. Bleed the air from the system
  14.  

 
label.common.footer.alt.autozoneLogo