Mazda Tribute 2001-06

2.3L L4 VIN D Auto 4

Print

Trouble Code: P0534



PCM - Air Conditioning (A/C) system

Possible Causes:



A/C system is low on Freon
 
A/C system has too much Freon
 
A/C compressor clutch is damaged or failed
 
PCM has failed
 

Trouble Code: P0552



Power Steering Pressure Switch Circuit Malfunction

Possible Causes:



Power steering switch signal circuit shorted to sensor ground
 
Power steering switch signal circuit shorted to chassis ground
 
Power steering switch is damaged or has failed
 
Engine Speed System (power steering function) is damaged
 
PCM has failed
 

Trouble Code: P0553



Power Steering Pressure Switch Circuit Malfunction

Possible Causes:



Power steering switch signal circuit shorted to sensor ground
 
Power steering switch signal circuit shorted to chassis ground
 
Power steering switch is damaged or has failed
 
Engine Speed System (power steering function) is damaged
 
PCM has failed
 

Trouble Code: P0571



Cruise Control Switch Circuit Malfunction

Possible Causes:



Cruise control switch malfunction
 
Connector or terminal malfunction
 
Short to power circuit in wiring from cruise control terminal B and PCM terminal 3P.
 
Short to ground circuit in wiring from cruise control terminal B and PCM terminal 3P
 
PCM has failed
 

Trouble Code: P0579



PCM - Vehicle Speed Signal (VSS) Malfunction

Possible Causes:



VSS malfunction
 
Connector or terminal malfunction
 
Short to power circuit in wiring from VSS and PCM terminal.
 
Short to ground circuit in wiring from VSS and PCM terminal.
 
PCM has failed
 

Trouble Code: P0581



PCM - Vehicle Speed Signal (VSS) malfunction

Possible Causes:



VSS malfunction
 
Connector or terminal malfunction
 
Short to power circuit in wiring from VSS and PCM terminal.
 
Short to ground circuit in wiring from VSS and PCM terminal.
 
PCM has failed
 

Trouble Code: P0602



PCM programming error

Possible Causes:



Reprogramming has not been completed properly
 
PCM has failed
 

Trouble Code: P0603



PCM Keep Alive Memory Test Error

Possible Causes:



KAM circuit is open (it may be an intermittent problem)
 
KAM circuit is shorted to ground
 
Battery terminals have high resistance due to corrosion or dirt
 
PCM has failed
 

Trouble Code: P0605



PCM Read Only Memory Test Error

Possible Causes:



PCM has failed (an internal fault)
 
PCM must be replaced when this code is set
 

Trouble Code: P0606



ECM/PCM Processor

Possible Causes:



PCM internal CPU malfunction
 

Trouble Code: P0620



Regulator / Generator malfunction

Possible Causes:



PCM internal malfunction* Configuration has not been properly completed.
 

Trouble Code: P0622



Control Module performance

Possible Causes:



PCM internal malfunction* Configuration has not been properly completed.
 

Trouble Code: P0645



A/C clutch relay (ACCR) malfunction

Possible Causes:



PCM internal malfunction* ACCR malfunction
 

Trouble Code: P0660



Variable Inertia Charging System Circuit Malfunction

Possible Causes:



VICS control circuit is open or shorted to ground
 
VICS power circuit is open (check the power from the relay)
 
VICS valve is damaged or has failed
 
PCM has failed
 

Trouble Code: P0703



Brake On/Off Switch Circuit Malfunction (Self-Test)

Possible Causes:



Brake switch signal circuit is open or shorted ground
 
Brake switch power circuit (B+) is open or shorted to ground
 
Brake switch is damaged, misadjusted or installed improperly
 
PCM has failed
 

Trouble Code: P0705



Transmission Range Switch Circuit Malfunction

Possible Causes:



TR signal -P- circuit shorted to the PCM power circuit (12v)
 
TR signal -D- circuit shorted to the PCM power circuit (12v)
 
TR signal -S- circuit shorted to the PCM power circuit (12v)
 
TR signal -L- circuit shorted to the PCM power circuit (12v)
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0706



Transmission Range Switch Circuit Malfunction

Possible Causes:



TR signal -P- circuit open between the switch and the PCM (0v)
 
TR signal -D- circuit open between the switch and the PCM (0v)
 
TR signal -S- circuit open between the switch and the PCM (0v)
 
TR signal -L- circuit open between the switch and the PCM (0v)
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0707



Transmission Range Switch Range/Performance

Possible Causes:



TR switch signal circuit is shorted to another switch signal
 
TR switch signal circuit is open (problem may be intermittent)
 
TR switch is damaged, out of adjustment or it has failed
 
PCM has failed
 

Trouble Code: P0708



Transmission Range Switch Circuit Malfunction

Possible Causes:



TR switch signal circuit is open between the switch and PCM
 
TR switch signal circuit is shorted between switch and PCM
 
TR switch signal circuit is shorted to VREF or system power
 
TR switch ground circuit is open between switch and ground
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0705



Digital Transmission Range Switch Circuit Malfunction

Possible Causes:



TR4 signal circuit is open or shorted to ground (0v or 12v)
 
TR3A signal circuit is open or shorted to ground (0v or 12v)
 
TR2 signal circuit is open or shorted to ground (0v or 12v)
 
TR1 signal circuit is open or shorted to ground (0v or 12v)
 
DTR switch or its connector is damaged, or switch has failed
 
PCM has failed
 

Trouble Code: P0708



Digital Transmission Range Switch Circuit Malfunction

Possible Causes:



TR switch signal circuit open between switch and the PCM (0v)
 
DTR switch or its connector is damaged, or switch has failed
 
PCM has failed
 

Trouble Code: P0707



Transmission Range Switch Circuit Malfunction

Possible Causes:



TR switch circuit is shorted to ground switch ground (0v)
 
TR switch circuit is shorted to chassis ground (0v)
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0708



Digital Transmission Range Switch Circuit Malfunction

Possible Causes:



TR switch circuit is open between the switch and PCM (0v)
 
TR switch or its connector is damaged, or the switch has failed
 
PCM has failed
 

Trouble Code: P0710



Transmission Fluid Temperature Sensor Circuit Malfunction

Possible Causes:



TFT sensor signal circuit is open or shorted to ground
 
TFT sensor ground circuit is open between sensor and PCM
 
TFT sensor signal circuit shorted to VREF or system power
 
TFT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0711



Transmission Fluid Temperature Sensor Circuit Range/Performance

Possible Causes:



TFT sensor signal circuit is open between sensor and the PCM
 
TFT sensor signal circuit is shorted to ground
 
TFT sensor is damaged or has failed
 
PCM has failed
 

Trouble Code: P0712



Transmission Fluid Temperature Sensor Low Input (High Temperature)

Possible Causes:



TFT sensor signal circuit has a short to ground condition
 
TFT sensor is damaged or has failed (it may be shorted)
 
PCM has failed
 

Trouble Code: P0713



Transmission Fluid Temperature Sensor High Input (Low Temperature)

Possible Causes:



TFT sensor signal circuit is open between sensor and the PCM
 
TFT sensor signal circuit has a short to power condition
 
TFT sensor is damaged or has failed (it may be open)
 
PCM has failed
 

Trouble Code: P0715



Turbine Shaft Sensor Circuit Malfunction

Possible Causes:



TSS (+) signal circuit is open (an intermittent fault)
 
TSS (+) signal circuit shorted to ground (intermittent fault)
 
TSS (-) signal circuit is open (an intermittent fault)
 
TSS (-) signal circuit shorted to ground (intermittent fault)
 
TSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0717



Turbine Shaft Sensor Circuit Malfunction

Possible Causes:



TSS (+) signal circuit is open or shorted to ground
 
TSS (-) signal circuit is open or shorted to ground
 
TSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0718



Turbine Shaft Sensor Circuit Malfunction

Possible Causes:



TSS (+) signal circuit is open or shorted to ground
 
TSS (-) signal circuit is open or shorted to ground
 
TSS reluctor has metal chips or is damaged, or has failed
 
PCM has failed
 

Trouble Code: P0720



Output Shaft Sensor Circuit Malfunction

Possible Causes:



OSS (+) signal circuit is open (fault may be intermittent)
 
OSS (+) signal circuit shorted to ground (an intermittent fault)
 
OSS (-) signal circuit is open (fault may be intermittent)
 
OSS (-) signal circuit shorted to ground (an intermittent fault)
 
OSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0721



Output Shaft Sensor Circuit Signal Erratic

Possible Causes:



OSS (+) circuit is open or shorted to ground (noisy circuit)
 
OSS (-) circuit is open or shorted to ground (noisy circuit)
 
OSS reluctor contains metal chips or is damaged
 
OSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0722



Output Shaft Sensor Circuit Signal Intermittent

Possible Causes:



OSS (+) circuit is open or shorted to ground (intermittent)
 
OSS (-) circuit is open or shorted to ground (intermittent)
 
OSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0723



Output Shaft Sensor Circuit Signal Intermittent

Possible Causes:



OSS (+) circuit is open or shorted to ground (intermittent)
 
OSS (-) circuit is open or shorted to ground (intermittent)
 
OSS is damaged or has failed
 
PCM has failed
 

Trouble Code: P0725



Engine Speed Signal Circuit Malfunction

Possible Causes:



CMP sensor signal erratic or missing (an intermittent fault)
 
PCM to TCM circuit is open or shorted to ground
 
TCM has failed
 
PCM has failed
 

Trouble Code: P0730



Engine Speed Signal Circuit Malfunction

Possible Causes:



CMP sensor signal erratic or missing (an intermittent fault)
 
PCM to TCM circuit is open or shorted to ground
 
PCM or the TCM has failed
 

Trouble Code: P0731



Transmission 1st Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 1-2 clutch is slipping (mechanical fault)
 
A/T 1-2 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator or the pressure modifier valve is stuck
 
A/T solenoid reducing valve is stuck (mechanical fault)
 
PCM has failed
 

Trouble Code: P0732



Transmission 2nd Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 2-3 clutch is slipping (mechanical fault)
 
A/T 1-2 or the 2-3 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator or the pressure modifier valve is stuck
 
A/T solenoid reducing valve is stuck (mechanical fault)
 
PCM has failed
 

Trouble Code: P0733



Transmission 3rd Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 3-4 clutch is slipping (mechanical fault)
 
A/T 2-3 or the 3-4 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator or the pressure modifier valve is stuck
 
A/T solenoid reducing valve is stuck (mechanical fault)
 
PCM has failed
 

Trouble Code: P0734



Transmission 4th Gear Ratio Incorrect

Possible Causes:



ATF level is too low, or the ATF is badly deteriorated
 
A/T line pressure is low, or the oil pump has failed
 
SSA, SSB, SSC or the PCS is stuck (mechanical fault)
 
A/T 2-4 brake bank or 3-4 clutch is slipping (mechanical fault)
 
A/T 1-2, 2-3 or 3-4 shift valve is stuck (mechanical fault)
 
A/T Pressure regulator, pressure modifier or solenoid reducing valve is stuck
 
PCM has failed
 

 
label.common.footer.alt.autozoneLogo