Mazda Tribute 2001-06

Removal & Installation

Print

  1. Place the selector lever in NEUTRAL.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the front driveshaft-to-transfer case bolts.
  6.  
  7. Remove the universal joint cap bolts. Index-mark the pinion and yoke to the rear driveshaft before removing the bolts.
  8.  
  9. Remove the universal joint cap straps.
  10.  
  11. Remove the front driveshaft.
  12.  
  13. To install, reverse the removal procedure.
  14.  



Click image to see an enlarged view

Fig. Rear driveshaft assembly

  1. Place the selector lever in NEUTRAL.
  2.  
  3. Raise and support the vehicle.
  4.  
  5. Remove the ground strap bolt
  6.  
  7. Remove the universal joint cap bolts. Index-mark the pinion and yoke to the rear driveshaft before removing the bolts.
  8.  
  9. Remove the universal joint cap straps.
  10.  
  11. Remove the center bearing support nuts.
  12.  
  13. Remove the universal joint cap bolts.
  14.  
  15. Remove the universal joint cap straps.
  16.  
  17. Remove the rear driveshaft.
  18.  
  19. To install, reverse the removal procedure.
  20.  

 
label.common.footer.alt.autozoneLogo