Mazda Tribute 2001-06

Brake Disc (Rotor)

Print

Removal & Installation



  1. Remove the brake caliper anchor plate.
  2.  
  3. Remove the brake disc retaining clips (if equipped) and the brake disc.
  4.  
  5. To install, reverse the removal procedure. Torque the anchor plate bolts to 111 ft. lbs. (150Nm).
  6.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and support the vehicle safely.
  4.  
  5. Remove the wheel and tire assembly.
  6.  
  7. Remove the brake caliper anchor plate.
  8.  
  9. Remove the brake disc retaining clips (if equipped) and the brake disc.
  10.  
  11. To install, reverse the removal procedure. Torque the anchor plate bolts to 111 ft. lbs. (150Nm).
  12.  

 
label.common.footer.alt.autozoneLogo