Mazda Tribute 2001-06

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel line to the fuel filter
     

  6.  
  7. Loosen the clamp and remove the filter
  8.  

To install:

  1. Install or connect the following:

    New clips to the fuel lines
     
    Fuel filter and tighten the clamp
     
    Fuel lines to the fuel filter
     
    Negative battery cable
     

  2.  
  3. Start the vehicle and check for leaks, repair if necessary.
  4.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Disconnect the negative battery cable.
    NOTE
    To deplete the backup power supply energy, disconnect the negative battery cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies, if equipped.

  6.  
  7. Disconnect the fuel line at the fuel filter.
  8.  
  9. Loosen the clamp and remove the filter.
  10.  

To install:

  1. Install or connect the following:

    New clips to the fuel lines
     
    Fuel filter and tighten the clamp
     
    Fuel lines to the fuel filter
     
    Negative battery cable
     

  2.  
  3. Start the engine and check for leaks, repair if necessary.
  4.  

 
label.common.footer.alt.autozoneLogo