Mazda Tribute 2001-06

Removal & Installation

Print


NOTE
If removing the intermediate shaft in order to repair a separate component, it should only be removed as an assembly with the RH front halfshaft.



Click image to see an enlarged view

Fig. Intermediate shaft

  1. Remove the RH front halfshaft.
  2.  
  3. Remove the inner halfshaft bearing retainer nuts
  4.  
  5. Remove the intermediate shaft
  6.  
  7. To install, reverse the removal procedure. Apply a thin coat of grease to the splines of the intermediate shaft.
  8.  
  9. Verify the front axle lubricant level is to specifications.
  10.  

 
label.common.footer.alt.autozoneLogo