Mazda Tribute 2001-06

Removal & Installation

Print

2.0L Engine



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Right front wheel
     
    Splash shield
     
    Drive belt
     
    Water pump pulley
     
    Water pump
     

  6.  

To install:



Click image to see an enlarged view

Fig. Exploded view of the water pump-2.0L engine

  1. Install or connect the following:

    Water pump. Torque the bolts to 89 inch lbs. (10 Nm).
     
    Water pump pulley. Torque the bolts to 89 inch lbs. (10 Nm).
     
    Drive belt
     
    Splash shield
     
    Right front wheel
     
    Negative battery cable
     

  2.  
  3. Refill the cooling system.
  4.  
  5. Start the vehicle and check for leaks, repair if necessary.
  6.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Right front wheel
     
    Splash shield
     
    Drive belt
     
    Water pump pulley
     
    Water pump
     

  6.  

To install:

  1. Install or connect the following:

    Water pump. Torque the bolts to 89 inch lbs. (10 Nm).
     
    Water pump pulley. Torque the bolts to 89 inch lbs. (10 Nm).
     
    Drive belt
     
    Splash shield
     
    Right front wheel
     
    Negative battery cable
     

  2.  
  3. Refill the cooling system.
  4.  
  5. Start the engine and check for leaks, repair if necessary.
  6.  

2.3L Engine





Click image to see an enlarged view

Fig. Water pump mounting-2.3L engine

  1. With the vehicle in NEUTRAL, position it on a hoist.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove the accessory drive belt.
  6.  
  7. Remove the coolant pump pulley bolts.
  8.  
  9. Remove the coolant pump pulley.
  10.  
  11. Remove the coolant pump bolts.
  12.  
  13. Remove the coolant pump.
  14.  
  15. Remove the coolant pump O-ring seal.
  16.  
  17. To install, reverse the removal procedure. Torque the water pump bolts to 89 inch lbs. (10 Nm). Torque the pulley bolts to 18 ft. lbs. (25 Nm).
  18.  
  19. Fill and bleed the cooling system.
  20.  



Click image to see an enlarged view

Fig. Water pump and related components-2.3L engine

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
    NOTE
    To deplete the backup power supply energy, disconnect the negative battery cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies, if equipped.

  4.  
  5. Drain the cooling system.
  6.  
  7. Raise and support the vehicle safely.
  8.  
  9. Drain the cooling system.
  10.  
  11. Remove the accessory drive belt.
  12.  
  13. Remove the water pump pulley bolts.
  14.  
  15. Remove the water pump pulley.
  16.  
  17. Remove the water pump bolts.
  18.  
  19. Remove the water pump.
  20.  
  21. Remove the water pump O-ring seal.
  22.  
  23. To install, reverse the removal procedure. Torque the water pump bolts to 89 inch lbs. (10 Nm). Torque the pulley bolts to 18 ft. lbs. (25 Nm).
  24.  
  25. Fill and bleed the cooling system.
  26.  

3.0L Engine



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Air cleaner outlet tube
     
    Water pump belt tensioner
     
    Coolant hoses
     
    Water pump
     
    Water pump from the housing
     

  6.  


    Click image to see an enlarged view

    Fig. Water pump mounting-3.0L engine


To install:



Water pump to the housing. Torque the bolts to 89 inch lbs. (10 Nm).
 
Water pump. Torque the bolts to 89 inch lbs. (10 Nm).
 
Coolant hoses
 
Water pump belt tensioner
 
Air cleaner outlet tube
 
Negative battery cable
 

  1. Refill the cooling system.
  2.  
  3. Start the vehicle and check for leaks, repair if necessary.
  4.  

Except 2006 Late Build Engines


Click image to see an enlarged view

Fig. Water pump and related components-except late build 3.0L engine

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Disconnect the negative battery cable.
    NOTE
    To deplete the backup power supply energy, disconnect the negative battery cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies, if equipped.

  6.  
  7. Drain the cooling system.
  8.  
  9. Remove or disconnect the following:

    Air cleaner outlet tube
     
    Water pump belt tensioner
     
    Coolant hoses
     
    Water pump
     
    Water pump from the housing
     

  10.  

To install:



Water pump. Torque the bolts to 89 inch lbs. (10 Nm).
 
Coolant hoses
 
Water pump belt tensioner
 
Air cleaner outlet tube
 
Negative battery cable
 

  1. Refill the cooling system. Bleed the cooling system.
  2.  
  3. Start the engine and check for leaks, repair if necessary.
  4.  

Late Build


Click image to see an enlarged view

Fig. Water pump and related components-late build 3.0L engine

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect the negative battery cable.
    NOTE
    To deplete the backup power supply energy, disconnect the negative battery cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies, if equipped.

  4.  
  5. Raise and support the vehicle safely.
  6.  
  7. Drain the cooling system.
  8.  
  9. Disconnect the crankcase ventilation tube and position it to the side.
  10.  
  11. Remove the water pump drive belt.
  12.  
  13. Using a water pump pulley removal tool, remove the water pump drive pulley.
  14.  
  15. Disconnect the heater hose from the water pump. Disconnect the water pump to engine hose and position it to the side.
  16.  
  17. Remove the three bolts from the water pump. Reposition the water pump to thermostat housing clamp. Remove the water pump and hose, as an assembly.
  18.  

To install:

  1. Position the water and install the retaining bolts. Torque the bolts to 89 inch lbs. (10 Nm) and than an additional 90 degrees.
  2.  
  3. Connect the hoses.
  4.  
  5. Install the water pump drive pulley flush with the end of the camshaft.
  6.  
  7. Continue the installation in the reverse order of the removal procedure.
  8.  
  9. Fill the cooling system with the proper grade and type coolant. Bleed the cooling system.
  10.  
  11. Start the engine and check for leaks, repair if necessary.
  12.  

 
label.common.footer.alt.autozoneLogo