Mazda Trucks 1972-1986 Repair Guide

Air Gap Adjustment

Print

1979 MODELS



  1. Using a wrench on the crankshaft pulley nut, turn the distributor shaft until one of the high points on the pick-up coil is aligned with the signal rotor face.
  2.  
  3. Loosen the setscrews and move the pickup coil until the gap between it and the signal rotor is 0.2-0.6mm, measured with a brass or plastic feeler gauge.
  4.  
  5. Tighten the setscrews and recheck the gap.
  6.  

 
label.common.footer.alt.autozoneLogo