Mazda Trucks 1972-1986 Repair Guide

License Plate Lights

Print

REMOVAL & INSTALLATION



See Figures 1, 2, 3 and 4

Click image to see an enlarged view

Fig. Fig. 1: To replace the rear license plate bulb, remove the lens mounting screws ...



Click image to see an enlarged view

Fig. Fig. 2: ... and pull out the assembly



Click image to see an enlarged view

Fig. Fig. 3: Remove the lens from the rubber boot ...



Click image to see an enlarged view

Fig. Fig. 4: ... then remove the bulb by pushing in and twisting it counterclockwise

  1. Remove the lens mounting screws and pull off the lens.
  2.  
  3. Carefully push in on the bulb and twist it counterclockwise to remove it.
  4.  
  5. Installation is the reverse of removal.
  6.  

 
label.common.footer.alt.autozoneLogo