Mazda Trucks 1972-1986 Repair Guide

Flywheel

Print

REMOVAL & INSTALLATION



  1. Remove the transmission.
  2.  
  3. Remove the clutch assembly.
  4.  
  5. Attach a ring gear brake, 49-1881-060 to the engine.
  6.  
  7. Straighten the tabs of the lockwasher and remove the flywheel nut using wrench 49-0820-035.
  8.  
  9. Remove the flywheel with puller 49-0839-305A.
  10.  

To install:
  1. Apply engine oil to the rear housing seal.
  2.  
  3. Position the flywheel on the shaft, aligning the key and keyway.
  4.  
  5. Apply sealer to both sides of the lockwasher and place it on the shaft.
  6.  
  7. Install the nut and tighten it to 362 ft. lbs.
  8.  
  9. Bend the tabs of the lockwasher.
  10.  
  11. Install the clutch and transmission.
  12.  

 
label.common.footer.alt.autozoneLogo