Mazda Trucks 1994-1998 Repair Guide

Safety Precautions


For a number of reasons, exhaust system work can be the most dangerous type of work you can do on your vehicle. Always observe the following precautions:

Support the vehicle extra securely. Not only will you often be working directly under it, but you'll frequently be using a lot of force, say, heavy hammer blows, to dislodge rusted parts. This can cause a vehicle that's improperly supported to shift and possibly fall.
Wear goggles. Exhaust system parts are always rusty. Metal chips can be dislodged, even when you're only turning rusted bolts. Attempting to pry pipes apart with a chisel makes the chips fly even more frequently.
If you're using a cutting torch, keep it a great distance from either the fuel tank or lines. Stop what you're doing and feel the temperature of the fuel bearing pipes on the tank frequently. Even slight heat can expand and/or vaporize fuel, resulting in accumulated vapor, or even a liquid leak, near your torch.
Watch where your hammer blows fall and make sure you hit squarely. You could easily tap a brake or fuel line when you hit an exhaust system part with a glancing blow. Inspect all lines and hoses in the area where you've been working.

Be very careful when working on or near the catalytic converter. External temperatures can reach 1,500°F (816°C) and more, causing severe burns. Removal or installation should be performed only on a cold exhaust system.

A number of special exhaust system tools can be rented from auto supply houses or local stores that rent special equipment. A common one is a tail pipe expander, designed to enable you to join pipes of identical diameter.

It may also be quite helpful to use solvents designed to loosen rusted bolts or flanges. Soaking rusted parts the night before you do the job can speed the work of freeing rusted parts considerably. Remember that these solvents are often flammable. Apply only to parts after they are cool!