Mazda Trucks 1994-1998 Repair Guide

Chassis Greasing


Chassis greasing should be performed every 7,500 miles (12,000 km) for most vehicles. Greasing can be performed with a commercial pressurized grease gun or at home by using a hand-operated grease gun. Wipe the grease fittings clean before greasing in order to prevent the possibility of forcing any dirt into the component.

Check the steering, driveshaft and front suspension components for grease fittings. There are far less grease points on the modern automotive chassis than there were on trucks of yesteryear.

A water resistant long life grease that meets Mazda's specification should be used for all chassis greasing applications.