Mercedes-Benz Cars 2000-05

Supercharger

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the engine coolant.
  4.  
  5. Remove or disconnect the following:

    Intake air assembly and plug supercharger openings
     
    Sensor block cover
     
    Electromagnetic clutch connector
     
    Coolant hose, radiator to water pump
     
    Coolant return hose
     
    Fan and shroud
     
    Supercharger drive belt
     
    Supercharger pressure connections
     
    Supercharger
     

  6.  

To install:


NOTE
Install the bottom securing bolt in the supercharger before installing.

  1. Install or connect the following:

    Supercharger. Torque the mounting bolts to 16 ft. lbs. (21 Nm).
     
    Pressure connections with new seals
     
    Drive belt
     
    Fan and shroud
     
    Coolant hoses
     
    Electromagnetic clutch connector
     
    Sensor block cover
     

  2.  
  3. Remove the plug from the inlet of the supercharger and install the intake air assembly.
  4.  
  5. Fill the cooling system, start the engine and check operation.
  6.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Drain the engine coolant.
  4.  
  5. Remove or disconnect the following:

    Intake air assembly. Plug supercharger openings
     
    Sensor block cover
     
    Electromagnetic clutch connector
     
    Coolant hose, radiator to water pump
     
    Coolant return hose
     
    Fan and shroud
     
    Supercharger drive belt
     
    Supercharger pressure connections
     
    Supercharger
     

  6.  

To install:


NOTE
Install the bottom securing bolt in the supercharger before installing.

  1. Install or connect the following:

    Supercharger. Torque the mounting bolts to 16 ft. lbs. (21 Nm)
     
    Pressure connections with new seals
     
    Drive belt
     
    Fan and shroud
     
    Coolant hoses
     
    Electromagnetic clutch connector
     
    Sensor block cover
     

  2.  
  3. Remove the plug from the inlet of the supercharger and install the intake air assembly.
  4.  
  5. Fill the cooling system, start the engine and check operation.
  6.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the engine coolant.
  4.  
  5. Remove or disconnect the following:

    Intake air assembly. Plug supercharger openings
     
    Sensor block cover
     
    Electromagnetic clutch connector
     
    Coolant hose, radiator to water pump
     
    Coolant return hose
     
    Fan and shroud
     
    Supercharger drive belt
     
    Supercharger pressure connections
     
    Supercharger
     

  6.  

To install:


NOTE
Install the bottom securing bolt in the supercharger before installing.

  1. Install or connect the following:

    Supercharger. Torque the mounting bolts to 16 ft. lbs. (21 Nm)
     
    Pressure connections with new seals
     
    Drive belt
     
    Fan and shroud
     
    Coolant hoses
     
    Electromagnetic clutch connector
     
    Sensor block cover
     

  2.  
  3. Remove the plug from the inlet of the supercharger and install the intake air assembly.
  4.  
  5. Fill the cooling system, start the engine and check operation.
  6.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the engine coolant.
  4.  
  5. Remove or disconnect the following:

    Intake air assembly and plug supercharger openings
     
    Sensor block cover
     
    Electromagnetic clutch connector
     
    Coolant hose, radiator to water pump
     
    Coolant return hose
     
    Fan and shroud
     
    Supercharger drive belt
     
    Supercharger pressure connections
     
    Supercharger
     

  6.  

To install:

Click image to see an enlarged view

Fig. View of the supercharger mounting


NOTE
Install the bottom securing bolt in the supercharger before installing.

  1. Install or connect the following:

    Supercharger. Torque the mounting bolts to 16 ft. lbs. (21 Nm).
     
    Pressure connections with new seals
     
    Drive belt
     
    Fan and shroud
     
    Coolant hoses
     
    Electromagnetic clutch connector
     
    Sensor block cover
     

  2.  
  3. Remove the plug from the inlet of the supercharger and install the intake air assembly.
  4.  
  5. Fill the cooling system, start the engine and check operation.
  6.  

 
label.common.footer.alt.autozoneLogo