Mercedes-Benz Cars 2000-05

Brake Pads

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Rear wheels
     
    Parking brake cable clip from the caliper
     
    Parking brake cable
     
    Brake pad wear sensor
     
    Brake pad connector from the caliper
     
    Brake pads
     

  4.  

To install:

  1. Retract the piston into the housing by rotating the piston clockwise.
  2.  
  3. Install or connect the following:

    New brake pads onto the pad carrier
     
    Brake pad connector
     
    Brake pad wear sensor
     
    Hand brake cable to the caliper.
     

  4.  
  5. Check the parking brake operation and adjust the cable if necessary.
  6.  
  7. Install the wheels.
  8.  

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Rear wheels
     
    Parking brake cable clip from the caliper
     
    Parking brake cable
     
    Brake pad wear sensor
     
    Brake pad connector from the caliper
     
    Brake pads
     

  4.  

To install:

  1. Retract the piston into the housing by rotating the piston clockwise.
  2.  
  3. Install or connect the following:

    New brake pads onto the pad carrier
     
    Brake pad connector
     
    Brake pad wear sensor
     
    Hand brake cable to the caliper.
     

  4.  
  5. Check the parking brake operation and adjust the cable if necessary.
  6.  
  7. Install the wheels.
  8.  

 
label.common.footer.alt.autozoneLogo