Inspection & Testing
Visually check the spark plug wires for burns cuts, or breaks in the insulation. Check the boots and the nipples on the distributor cap and/or coil. Replace any damaged wiring; cracked or shorted spark plug wires can short to ground, and cause a -miss- when the engine is running.
Removal & Installation
- Before servicing the vehicle, refer to the Precautions section.
- Label each spark plug wire and make a note of its routing.
- Twist, then pull the spark plug wire from the spark plug and then from the coil pack.
- If replacing the spark plug wires, match the old wire with an appropriately sized wire in the new set.
- Lubricate the boots and terminals with dielectric grease and install the wire on the coil pack. Make sure the wire snaps into place.
- Route the wire in the exact path as the original and connect the wire to the spark plug.
- Repeat the process for each remaining wire.