Mercedes-Benz Truck 2000-05

Wheel Speed Sensors

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle, then remove the wheel.
  4.  
  5. Separate the speed sensor and speed sensor wiring connector.
  6.  
  7. Remove the bolt securing the sensor, then remove the sensor from wheel bearing housing.
  8.  

To install:

  1. Before inserting speed sensor, clean the bore inner surface and coat speed sensor all around with grease A 000 989 63 51 or equivalent.
  2.  
  3. Insert the speed sensor into the bore and tighten the bolt to 71 inch lbs. (8 Nm).
  4.  
  5. Connect the speed sensor wiring.
  6.  

 
label.common.footer.alt.autozoneLogo