Mercedes-Benz Truck 2000-05

Voltage Regulator

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove the inner fender liner from the front fender.
  4.  
  5. Remove the screws securing the heat shield on the back of the alternator. Unclip the cover and remove it.
  6.  
  7. Remove the screws securing the regulator, then remove it from the alternator.
  8.  
  9. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. The voltage regulator is secured to the back of the alternator

  10.  

 
label.common.footer.alt.autozoneLogo