Mercedes-Benz Truck 2000-05

Brake Disc (Rotor)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Raise and support the vehicle, then remove the wheels. Make sure the wheels are blocked and the transmission is in Park, then disengage the parking brake.
  4.  
  5. Remove the brake caliper.
  6.  
  7. Preload the automatic cable slack adjuster by turning eccentric bolt g half a turn while pushing backwards in the slot until eccentric b engages with the raised section h in holddown clip d.

    Click image to see an enlarged view

    Fig. Preloading the automatic cable slack adjuster

  8.  
  9. Remove the screw securing the disc to the wheel hub, then remove the disc.
  10.  
  11. Installation is the reverse of removal. Tighten the disc securing screw to 17 ft. lbs. (23 Nm).
  12.  

 
label.common.footer.alt.autozoneLogo