Mercedes-Benz Truck 2000-05

Stabilizer Bar (Sway Bar)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Link rod from control arm to torsion bar
     
    Stabilizer bar clamps
     
    Stabilizer bar

    Click image to see an enlarged view

    Fig. Rear stablizer bar mounting

     

  4.  

To install:

  1. Install or connect the following:

    Stabilizer bar and brackets with new bushings. Torque the bracket nuts to 21 ft. lbs. (28 Nm).
     
    Link rod. Torque the bracket nuts to 15 ft. lbs. (21 Nm).
     

  2.  

 
label.common.footer.alt.autozoneLogo