Mercedes-Benz Truck 2000-05

Torsion Bars

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Link rod from control arm to torsion bar
     
    Torsion bar clamps
     
    Torsion bar
     

  4.  


    Click image to see an enlarged view

    Fig. Rear torsion bar mounting


To install:

  1. Install or connect the following:

    Torsion bar and brackets with new bushings. Torque the bracket nuts to 21 ft. lbs. (28 Nm).
     
    Link rod. Torque the bracket nuts to 15 ft. lbs. (21 Nm).
     

  2.  

 
label.common.footer.alt.autozoneLogo