Mercedes Coupes/Sedans/Wagons 1974-1984 Repair Guide

Doors

Print

REMOVAL & INSTALLATION



When removing the door, it is easier to remove the hinges with the door because the door side hinges are very accessible.

  1. Disconnect the negative battery cable. Mark the position of the door hinges-to-body to make the installation easier.
  2.  
  3. If equipped with power operated components, remove the trim panel and detach the inner panel water deflector enough to disconnect the wiring harness from the components. Separate and remove the rubber conduit and the wiring harness from the door.
  4.  
  5. Using an assistant (to support the door), remove the upper and lower hinge-to-body bolts. Remove the door from the vehicle.
  6.  
  7. To install, reverse the removal procedures.
  8.  

 
label.common.footer.alt.autozoneLogo