Metro, Prizm 2000-2002

Arming The System

Print

  1. Install or connect the following:

    Negative battery cable
     
    Turn the ignition switch to the LOCK position and remove the key
     
    Yellow connector for the passenger-s side Air Bag (inflator) module and the yellow connector for the driver-s air bag (inflator) module. Be sure to lock each connector with the lock lever
     
    Glove box
     
    Left side steering wheel side cap
     
    AIR BAG-IG fuse to the junction block
     

  2.  
  3. Staying away from both air bags, turn the ignition switch to the ON position and verify that the AIR BAG warning lamp flashes 7 times, then turns OFF. If the system does not operate as described, diagnosis and repairs to the air bag system are necessary.
  4.  

  1. Turn the ignition switch to the LOCK position and remove the key.
  2.  
  3. Install or connect the following:

    Negative battery cable
     
    Yellow 2-way connectors for the driver and passenger-s seat modules
     
    Connectors and lock them into place with the lock levers
     
    Yellow 2-way connector to the passenger-s side inflatable restraint pigtail. Connect the lock with the lever
     
    Glove box
     
    Yellow 2-way connector for the steering wheel module coil
     
    Connectors and lock them into place with the lock levers
     
    Lower steering column trim cover
     
    IGN fuse and CIG and RADIO fuse to the junction block
     

  4.  
  5. Staying away from both air bags, turn the ignition ON and verify that the AIR BAG warning lamp flashes 7 times, then turns OFF. If the system does not operate as described, diagnosis and repairs to the air bag system are necessary.
  6.  

 
label.common.footer.alt.autozoneLogo