Metro, Prizm 2000-2002

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the fluid line from the clutch slave cylinder.
  4.  
  5. Remove the clutch slave cylinder bolts.
  6.  
  7. Remove the clutch slave cylinder from the transaxle.

    Click image to see an enlarged view

    Fig. Clutch slave cylinder-Prizm

  8.  

To install:

  1. Install the clutch slave cylinder to the transaxle.
  2.  
  3. Install the clutch slave cylinder bolts and tighten them to 9 ft. lbs. (12 Nm).
  4.  
  5. Install the clutch slave cylinder fluid line to the clutch slave cylinder.
  6.  
  7. Bleed the hydraulic clutch system.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo