Metro, Prizm 2000-2002

Distributor Cap & Rotor

Print

Removal & Installation



1.0L
  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the distributor electrical connector.
  4.  
  5. Remove two screws and the distributor cap from the distributor. Remove rotor.

    Click image to see an enlarged view

    Fig. Distributor housing, cap (3) and rotor (2)-Metro 1.0L engine

  6.  

To install:

  1. Install the new distributor cap seal to the distributor cap.
  2.  
  3. Install rotor to the distributor, then the distributor cap. Secure the cap with two screws.
  4.  
  5. Connect the distributor electrical connector.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo