Metro, Prizm 2000-2002

Ignition Module

Print

Removal & Installation



1.0L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the ignition control module (igniter) electrical connector.
  4.  
  5. Remove two screws and the ignition control module (igniter) from the mounting bracket.

    Click image to see an enlarged view

    Fig. Ignition control module (1) located against the bulkhead-Metro

  6.  

To install:

  1. Install the ignition control module (igniter) to the mounting bracket. Secure with the 2 screws.
  2.  
  3. Connect the ignition control module (igniter) electrical connector.
  4.  
  5. Connect the negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo