Metro, Prizm 2000-2002

Gasoline Engine Tune-Up Specifications

Print

TUNE-UP SPECIFICATIONS
YearEngine Displacement LitersEngine ID/VINSpark Plug Gap (in.)Ignition Timing (deg.)Fuel Pump (psi)Idle Speed (rmp)Valve Clearance (in.)
        MTAT   MTATIn.Ex.
20001.060.0415B -5B -23-30800850HYDHYD
  1.390.0415B -5B -23-30800850HYDHYD
  1.880.03110B -10B -31-37700-750700-7500.0060-0.0100-
                  0.01000.0140
1NOTE: The Vehicle Emission Control Information label often reflects specification changes made during production. The label figures must be used if they differ from those in this chart.
2- Connect a fused jumper from Duty Check cavity 4 to cavity 5 for fixed timing (DLC connector located at left strut tower)
3- Insert jumper wire between terminals in DLC connector E1 and TE1
TUNE-UP SPECIFICATIONS
YearEngine Displacement LitersEngine ID/VINSpark Plug Gap (in.)Ignition Timing (deg.)Fuel Pump (psi)Idle Speed (rmp)Valve Clearance (in.)
        MTAT   MTATIn.Ex.
20011.060.0415B -5B -23-30800850HYDHYD
  1.390.0415B -5B -23-30800850HYDHYD
  1.880.03110B -10B -31-37700-750700-7500.0060-0.0100-
                  0.01000.0140
1NOTE: The Vehicle Emission Control Information label often reflects specification changes made during production. The label figures must be used if they differ from those in this chart.
2- Connect a fused jumper from Duty Check cavity 4 to cavity 5 for fixed timing (DLC connector located at left strut tower)
3- Insert jumper wire between terminals in DLC connector E1 and TE1
TUNE-UP SPECIFICATIONS
YearEngine Displacement LitersEngine ID/VINSpark Plug Gap (in.)Ignition Timing (deg.)Fuel Pump (psi)Idle Speed (rmp)Valve Clearance (in.)
        MTAT   MTATIn.Ex.
20021.880.03110B -10B -31-37700-750700-7500.0060-0.0100-
                  0.01000.0140
1NOTE: The Vehicle Emission Control Information label often reflects specification changes made during production. The label figures must be used if they differ from those in this chart.
2- Connect a fused jumper from Duty Check cavity 4 to cavity 5 for fixed timing (DLC connector located at left strut tower)
3- Insert jumper wire between terminals in DLC connector E1 and TE1
 
label.common.footer.alt.autozoneLogo