Miata 1990-1997

Throttle Body

Print

Removal & Installation





Click image to see an enlarged view

Fig. Throttle body removal

  1. Remove the negative battery terminal.
  2.  
  3. Remove the air pipe.
  4.  
  5. Remove the accelerator cable from the throttle lever.
    NOTE
    Before disconnecting the water hoses, drain the engine coolant.

  6.  
  7. Disconnect the water hoses.
  8.  
  9. Disconnect the connectors for the ISC valve and the throttle sensor
  10.  
  11. Remove the throttle body.
  12.  
  13. Installation is the reverse of removal.

    Click image to see an enlarged view

    Fig. Throttle body installation

  14.  

 
label.common.footer.alt.autozoneLogo