Miata 1990-1997

Ignition Switch

Print

Removal & Installation



Specific to:

Mazda Miata 1990-1993

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the steering column covers. Remove the lower panel or air duct, if necessary.
  6.  
  7. Disconnect the electrical connectors.
  8.  
  9. Remove the switch screws and the combination switch.
  10.  
  11. Disconnect the ignition switch wires.
  12.  
  13. Use a chisel to make slots in the lock screws. Remove the screws.
  14.  
  15. Installation is the reverse of the removal procedure. Install the new screws until the head twists off.
  16.  
  17. Make sure the lock operates properly while tightening the new locking screws.
  18.  

Specific to:

Mazda Miata 1994-1997

  1. If equipped, deactivate the audio antitheft system.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove the steering column cover.
  6.  
  7. Disconnect the connector and remove the ignition switch.
  8.  
  9. Installation is the reverse of removal.
  10.  

 
label.common.footer.alt.autozoneLogo