Mitsubishi Car 1999-05

Fenders

Print

Removal & Installation





Click image to see an enlarged view

Fig. Fender mounting-1997-00 Diamante

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front bumper assembly.
  4.  
  5. Remove the front side airdam.
  6.  
  7. Remove the retainers and the front splash shield.
  8.  
  9. Remove the retainer bolts along the upper, lower and rear side of the fender.
  10.  
  11. Remove the fender from the vehicle.
  12.  
  13. Apply sealant between the fender and the body panels. This will assure that there are no gaps when the fender is mounted. Install the fender to the vehicle and tighten all retainer bolts to 4 ft. lbs. (6 Nm).
  14.  
  15. The installation is the reverse of removal.
  16.  



Click image to see an enlarged view

Fig. Fender mounting-1999-00 Galant

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front bumper assembly.
  4.  
  5. Remove the headlamp lamp assembly.
  6.  
  7. Remove the fender side cladding.
  8.  
  9. Remove the stone guard.
  10.  
  11. Remove the retainers and the front splash shield.
  12.  
  13. Remove the hood damper bracket.
  14.  
  15. Remove the retainer bolts along the upper, lower and rear side of the fender.
  16.  
  17. Remove the fender from the vehicle.
  18.  
  19. Apply sealant between the fender and the body panels. This will assure that there are no gaps when the fender is mounted. Install the fender to the vehicle and tighten all retainer bolts to 4 ft. lbs. (6 Nm).
  20.  
  21. The installation is the reverse of removal.
  22.  



Click image to see an enlarged view

Fig. Fender mounting-1993-00 Mirage

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front bumper assembly.
  4.  
  5. Remove the retainers and the front splash shield.
  6.  
  7. Remove the front turn signal lamp assembly.
  8.  
  9. Remove the ornament from the fender.
  10.  
  11. Remove the retainer bolts along the upper, lower and rear side of the fender.
  12.  
  13. Remove the fender from the vehicle.
  14.  
  15. Installation is the reverse of the removal procedure.
  16.  

 
label.common.footer.alt.autozoneLogo