Mitsubishi Car 1999-05

Windshield Washer System

Print

Washer Pump & Reservoir



Removal & Installation
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the windshield washer fluid reservoir.
  4.  
  5. Drain any washer fluid in the reservoir into an appropriate container.
  6.  
  7. Remove the pump from the reservoir by either removing the retaining hardware or twisting gently until it is free from the reservoir.
  8.  

To install:

  1. Inspect the pump seal on the reservoir, replace if necessary.
  2.  
  3. Install the pump into place until seated on the seal.
  4.  
  5. Install the windshield washer fluid reservoir.
  6.  
  7. Refill the washer fluid reservoir.
  8.  
  9. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo