Mitsubishi Eclipse 1990-1998 Repair Guide
Flywheel and Ring Gear
REMOVAL & INSTALLATION
If equipped with a manual transaxle, refer to the Clutch, Removal and Installation procedures in
, then remove the transaxle and the clutch assembly. If equipped with an automatic transaxle, refer to the Automatic Transaxle, Removal and Installation procedures in
, then remove the transaxle and the torque converter.
For manual transaxles, remove the flywheel-to-crankshaft bolts and the flywheel. For automatic transaxles, remove the drive plate-to-crankshaft bolts and the drive plate.
To install, reverse the removal procedures. Tighten the flywheel-to-crankshaft bolts to specifications.