Mitsubishi Eclipse 1990-1998 Repair Guide

Liftgate Lock Cylinder

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the rear liftgate trim.
  4.  
  5. If necessary, remove the rear combination light.
  6.  
  7. Unfasten the retainer, then remove the lock cylinder (vehicles without the theft deterrent system) r lock cylinder switch (vehicles with theft deterrent switch) from the liftgate.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

 
label.common.footer.alt.autozoneLogo