Mitsubishi Endeavor 2004-06

Wheel Speed Sensors

Print

Removal & Installation



Front
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the front wheel and tire assemblies.
  4.  
  5. Remove the front mud guard and splash shield.
  6.  
  7. Remove the bolts and the front ABS speed sensor.
  8.  
  9. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the front and rear speed sensors

  10.  

Rear
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel and tire assemblies.
  4.  
  5. Remove the following components for access to the rear ABS speed sensor:

    Luggage floor rear board
     
    Tonneau cover
     
    Luggage floor front board
     
    Parcel strap hook
     
    Luggage floor side board
     
    Rear end trim
     
    Rear seat assembly
     
    Scuff plate cover and rear scuff plate
     
    Rear seat belt lower anchor bolt
     
    Sash guide cover
     
    Rear seat belt shoulder anchor bolt
     
    Seat belt cover
     
    Liftgate door opening trim
     
    Rear door opening trim
     
    Lower quarter trim
     

  6.  
  7. Remove the bolts and the rear ABS sensor
  8.  
  9. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the front and rear speed sensors

  10.  

 
label.common.footer.alt.autozoneLogo