Mitsubishi Endeavor 2004-06

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument center panel, by removing any applicable retaining screws, then carefully prying the panel off, being careful not to damage the panel or retaining clips.
  4.  
  5. Remove the heater-A/C control panel.
  6.  
  7. If necessary, remove the knobs.
  8.  

To install:

  1. Installation is the reverse of the removal procedure. On 2005-2006 vehicles, turn the ignition ON and then OFF , and keep it off for at least ten seconds.
  2.  

 
label.common.footer.alt.autozoneLogo